Filter
Top Products
ATM-TRK (Circuit Emulation Service Circuit Pack)
Issue 1 June 2005 619
ATM-TRK-related commands
Table 207: ATM CES troubleshooting commands on page 619 lists some commands that can
be useful in troubleshooting ATM errors and alarms.
Amber One or more CES signaling groups
administered
On
Amber CES signaling group not administered or
not reporting to firmware
Off
Table 206: ATM-TRK LED interpretation (continued)
LEDs Condition LED status
2 of 2
Table 207: ATM CES troubleshooting commands
Command Description
display circuit-packs cabinet Shows the circuit packs in the cabinet,
identifying ATM trunk as well as ATM-EI
boards. “ATM Interface” boards have not been
administered as CES or PNC.
display atm ports location Shows the 256 ports on the ATM board with
the corresponding signaling and trunk group.
list configuration atm Lists the ATM boards, identifying equipment
location, board code, type, and vintage.
list configuration trunks Lists boards identifying assigned ports. While
the ATM board is listed, the 256 ports are not.
busyout/release atm
signaling-group
Busyout or release of an ATM signaling group
within a trunk group.
status atm signaling-group Show current status of an ATM signaling
group.
status trunk-group Shows status of the trunk group (ATM
signaling groups are part of trunk groups).