Avaya 03-300430 Home Security System User Manual


  Open as PDF
of 2574
 
Denial Events
224 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
1767 Rmt Logout COR restricted no info available
1768 Rmt Logout COS restricted no info available
1769 Rmt Logout invalid input no info available
1770 Rmt Logout tenant number no info available
1771 Rmt Logout cant do self no info available
1772 PSA on Virt EXT disallow Personal Station Access (PSA) associate/
disassociate not allowed for virtual extension.
1773 Cnf/xfr Atd Intcpt Ann Attempt to transfer an intercept announcement at
the attendant.
1774 Stn Lock act/deact failed Station lock activation or deactivation failed.
1775 No adm for SBS extensions Separation of Bearer and Signaling (SBS) call
tried to allocate an SBS extension, but none was
administered.
1776 Can't send SBS # to orig Separation of Bearer and Signaling (SBS) call
tried to send back an INFO message with the
SBS complete public number, but the INFO could
not be sent. Check proper administration of
isdn-pub-unk form.
1777 Calling Pty COR chk fail Error occurred when retrieving Class of
Restriction (COR) of calling party.
1778 Orig COR/Auth COR dny Calling party Class of Restriction (COR) not
allowed to use mapped COR from authorization
code entry.
1779 FIPN RO when call on hold Fujitsu Intelligent Priva Network (FIPN -a Fujitsu
ISDN Protocol spec) route optimization denial.
There is call on hold. SA8506
1780 AAR/ARS fac not
administered
ARS/ARR Feature Access Code is not
administered.
1781 Note: Error codes 1781 through 1791 apply to Feature Access Code invocations that are designed to operate on
contact closure relays on a G350 Media Gateway. These error codes apply only to Linux-based servers.
1781
1
CC: Improper COS ARS/ARR Feature Access Code is not
administered.
1782
1
CC: Invalid digits Invalid digits (or a symbol for a digit, etc.) entered
for contact-closure related operation on a G350
Media Gateway.
1783
1
CC: MG# out of range Media gateway number is out-of-range.
1784
1
CC: software error Contact-closure related operation had internal
software error, should never happen. First byte of
the seconds data item gives info to ID where
error occurred out of many places that it can
happen.
1785
1
CC: Invalid closure# Contact-closure related operation had bad
closure number.
Table 50: Call Process denial events (1225 - 1899) (continued)
Event
Type
Event Description, as it
appears on the event log
Explanation Event
Data 1
Event Data 2
32 of 33