Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
530 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
B-side ATM-EI—Critical Reliability
1. Enter status pnc, and ensure that the A-PNC is active.
If not, request a pnc interchange using reset pnc interchange.
2. Enter busyout pnc-standby.
3. Enter list config carrier, and verify that an ATM circuit pack is assigned for the new
location. If not, add the ATM circuit pack’s translations.
4. Enter busyout atm pnc n (connection number) b-pnc.
5. Enter change atm pnc n (connection number) and change circuit pack location for the B
side.
6. Enter release pnc-standby.
Changing ATM Address of Standby
ATM PNC EI, Critical Reliability
1. Enter busy pnc-standby.
2. Enter change atm pnc n (connection number), and change the ATM address for the
standby side.
3. Enter release pnc-standby.
Error Log Entries and Test to Clear Values
Table 169: ATM-EI Error Log Entries
Error
Type
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Test to Clear Value
0 (a) 0 Any Any Any test board location
2 (b
) None MIN ON
18 (c
)0 busyout board
location
WRN OFF release board location
23 (d
) 0 None WRN OFF
125 (e
) None MIN ON
131 (f
) None MIN ON
257-259
(g
)
Any Expansion Interface
Control Channel test
(#316)
MAJ ON test board location r 2
1 of 3