Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
1648 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
SAKI Sanity Test (#53)
This test is destructive.
This test resets the circuit pack or media module. This test is executed as part of the reset
board location command.
Table 606: Test #53 SAKI Sanity Test
Error
Code
Test
Result
Description / Recommendation
None ABRT System resources required for this test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
1015 ABRT Port is not out-of-service.
1. Busy out the circuit pack or media module.
2. Execute command again.
2100 ABRT System resources required for this test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
1 FAIL The media module failed to reset.
2 FAIL The media module failed to restart.
1. Execute command again.
2. If the problem persists, replace the media gateway.
PASS The circuit pack or media module initializes correctly.
1. Run the short test sequence.
Any NO
BOARD
This is normal if the test is being done when the system is booting up.
Otherwise, there is some inconsistency between the physical
configuration and the data kept in the system.
1. Verify that the system is not in a stage of booting up.
2. Retry the command at 1-minute intervals up to 5 times.