Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
2290 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
0NO
BOARD
The test could not relate the internal ID to the port (no board). This could
be due to incorrect translations, no board is inserted, an incorrect board is
inserted, or an insane board is inserted.
1. Check to ensure that the board’s translations are correct. Use list
config, and resolve any problems that are found.
2. If the board was found to be correctly inserted in step 1, enter
busyout board location
3. Enter reset board location
4. Enter release board location
5. Enter test board location long
This should re-establish the linkage between the internal ID and the port. If
this is not the case, check to see that there is a valid board inserted.
Table 818: Test #136 DS1 Tie Trunk Seizure Test (continued)
Error
Code
Test
Result
Description / Recommendation
5 of 5