Filter
Top Products
CLSFY-PT (Call Classifier Port)
Issue 1 June 2005 811
CLSFY-PT (Call Classifier Port)
S8700 | 8710 / S8500
The TN744 Call Classifier is a service circuit pack that provides specialized tone detection
capabilities to support the Outbound Call Management (OCM) and Inbound Call Management
(ICM) features. The TN744 supports both A-law and Mu-law companding.
The TN744 has eight ports (CLSFY-PTs), each capable of supporting call classification,
touch-tone reception and MFC-tone generation and detection. The CLSFY-PT MO implements
a set of tests designed to ensure proper operation of the Call Classifier.
Error Log Entries and Test to Clear Values
Notes:
a. A major alarm is raised if the total number of call classifier ports currently in-service is less
than or equal to 1/2 of the administered threshold number. For major or minor alarm, run
the short test sequence on the alarmed port and follow the error code procedures for the
individual tests.
The in-service threshold number for alarming call classifier ports is administered using the
change system-parameters maintenance.
MO Name in Alarm Log Alarm
Level
Initial Command to Run Full Name of MO
CLSFY-PT MAJ test port location sh Call Classifier Port
CLSFY-PT MIN test port location sh Call Classifier Port
CLSFY-PT WRN test port location sh Call Classifier Port
Table 278: Call Classifier Port (CLSFY-PT) Error Log Entries
Error
Type
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Test to Clear Value
1 any Tone Detector Audit/
Update test (#43)
MAJ / MIN
(a
)
ON test port location r 2
18 busyout port WRN OFF release port location
257 (b
) 17666 Tone Detection Audit
Update test (#43)
MAJ / MIN
(a
)
ON test port location r 3
513 (c
) any Tone Detection
Verification test (#42)
MAJ / MIN
(a
)
ON test port location r 3