Filter
Top Products
PROC-SAN (Process Sanity Audits)
Issue 1 June 2005 1911
PROC-SAN (Process Sanity Audits)
S8700 | 8710 / S8500
The Process Sanity Audits MO is responsible for monitoring the sanity of software processes in
the system. If the Process Sanity Audits MO detects that a process has gone insane (does not
respond to a sanity message within an allotted time period), the process will be restarted. If the
Process Sanity Audits MO detects that multiple processes (or a single key process) do not
respond to sanity messages within an allotted time period, a system recovery action will be
initiated.
The Process Sanity Audits MO has no alarms and no tests. Certain errors are logged to the
Hardware Error Log for information purposes only.
Error Log Entries and Test to Clear Values
Note:
a. Error Type 10, 204: a system recovery action was taken because one or more software
processes failed to respond to a sanity audit in a timely fashion. As a result of the recovery
action, the system may have temporarily suspended service for a period of time
surrounding the error.
MO Name in
Alarm Log
Alarm
Level
Initial Command to Run Full Name of MO
PROC-SAN none none Process Sanity Audits
Table 700: Process Sanity Audits Error Log Entries
Error
Type
Aux
Data
Associated
Test
Alarm
Level
On/Off
Board
Test to Clear
Value
0 0 Any Any Any none
10 (a
) 0 none none none none
204 (a
) any none none none none