Filter
Top Products
96 FSN Series • User’s Guide • Rev 01
3. Control Panel Orientation
Control Panel Descriptions
~ Enable M/E 2 to include the entire M/E 2 bank in a store procedure, or
remove the bank from a recall procedure. Using the Memory Menu,
you can elect to include or exclude certain sub-sections of M/E 2.
~ Enable PGM to include the entire PGM bank in a store procedure, or
remove the bank from a recall procedure. Using the Memory Menu, you
can elect to include or exclude certain sub-sections of the PGM bank in
the procedure.
~ Enable SYS to include system-related functions (such as input mappings
and input setups) in the selected store procedure, or remove the
functions from a recall procedure. Using the Memory Menu, you can
elect to include or exclude certain system sub-functions.
~ The CUST button is not available in version 3.0.
~ The STILL button is not available in version 3.0.
~ Enable AUX to include all Aux bus assignments currently on the panel in
a store procedure, or remove the buses from a recall procedure. Using
the Memory Menu, you can elect to include or exclude certain individual
Aux buses.
~ Enable DVE to include the current DVE effect (that is being programmed
on the DVE Menu) in a store, or remove the stored effect from a recall.
When you store a DVE memory register, all DVE channels currently
containing keyframes will be stored. Using the Memory Menu, you can
include or exclude selected DVE channels from the register.
Please note the following important references:
~ In Chapter 5, refer to the “Memory Menu” section on page 174 for
complete details on all switcher memory functions.
~ In Chapter 7, refer to the “Working with Memory Registers” section on
page 337 for more information about memory registers.
4) Keypad
The Keypad includes buttons that are arranged in a manner similar to the Touch
Screen’s keypad. The following functions are context sensitive:
~ When STORE or RECALL is lit, you can enter memory registers (from 1
through 1000).
~ When a keypad appears on the Touch Screen, you can enter and trim
values for numeric functions. In this mode, the physical Keypad works in
M/E 2
Note
On the FSN-150, M/E 2 control must be enabled to fully utilize
this memory module. In Chapter 7, refer to the “M/E 2
Control on the FSN-150” section on page 349 for details.
PGM
SYS
CUST
STILL
AUX
DVE
Important
When working with memory registers, the system will not
automatically display the Memory Menu unless you navigate
to the menu on the Touch Screen, or press and hold the
STORE or RECALL button.