Filter
Top Products
246 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
System Menu
lìíéìí=~åÇ=mêçÅÉëë=qççä=_~ê=cìåÅíáçåë
On the Output and Process Panel, the following functions are provided in the Tool Bar:
• Press {DVI Sync} to select the polarity of the digital sync output on the DVI
connector. The following options are available in the pop-up:
~ +H+V
~ +H-V
~ -H+V
~ -H-V
• Press {Analog Type} to choose the type of analog sync output desired on the
HD-15 connector. The following options are available in the pop-up:
~ CVBS
~ Y/C
~ SOG/Y
~ CSync
~ HV Sync
• If {HV Sync} is selected on the {Analog Type} button, press {Analog Sync} to
select the polarity of the analog sync output on the HD-15 connector. The
following options are available in the pop-up:
~ +H+V
~ +H-V
~ -H+V
~ -H-V
• Press {Copy All Settings} to copy all settings on the current UOC channel to
another UOC output channel. The
Copy Settings Keypad appears, which lists
all other UOC channels in the frame — except the current channel. Select the
desired Aux output, then press
{Copy} to complete the process.
• Press {Restore Default Settings} to recall the selected Aux output’s default
setup parameters back into the output’s “temporary” settings on the menu. Note
that all settings on the
Advanced UOC Setup Menu are also set to default.
DVI
Sync
+H+V
Analog
Type
HV Sync
Analog
Sync
+H+V
Copy
All
Settings
Restore
Default
Settings