Filter
Top Products
FSN Series • User’s Guide • Rev 01 157
5. Menu Orientation
Keyer Menu
hÉóÉê=jÉåì
The Keyer Menu enables you to modify all keyers on the control panel. Key sources are
selected on the
Key Bus in an M/E and on the Phantom Key Bus on the PGM bank. In
Chapter 1, refer to the “
Glossary of Switcher Terms” section on page 20 for definitions of
the various key terms.
The figure below illustrates a sample
Keyer Menu:
Figure 5-38. Keyer Menu (sample)
The Keyer Menu is virtually identical for all keyers, and using the {Keyer} button, you can
adjust keyers on all banks without leaving the menu. A status table is provided in the Keyer
Menu’s
Palette, and key modifiers are available on the Tool Bar along with their
associated value buttons to the right. Note that if a DVE channel is assigned to a keyer, a
different set of functions are available on the
Palette.
The following topics are discussed in this section:
• Keyer Menu Access
• Keyer Status Table
• Keyer Functions and Modifiers
• Advanced Key Functions