Filter
Top Products
FSN Series • User’s Guide • Rev 01 185
5. Menu Orientation
Memory Menu
^Çî~åÅÉÇ=jÉãçêó=cìåÅíáçåë
The Advanced Memory Menu provides access to the following memory functions:
• Locking and Unlocking Registers
• Deleting Registers
Please note the following important points regarding the Advanced Memory Menu:
• the Advanced Memory Menu is only available in View Mode.
• If you initiate a Store or Recall function and you are not in the Advanced
Memory Menu
, the {Advanced} button is grayed out.
• If you initiate a Store or Recall function and you are already in the Advanced
Memory Menu
, the system automatically takes you back to the Memory Menu.
These functions occur to prevent you from locking, unlocking or deleting a memory register
during a
Store or Recall operation.
içÅâáåÖ=~åÇ=råäçÅâáåÖ=oÉÖáëíÉêë
The “lock/unlock register” feature is available in the following memory mode only:
• View Mode
By default, a newly stored memory register is unlocked. As desired, you can lock a
register to prevent accidental deletion, or accidental over-writing.
To use the feature:
• From the Memory Menu, highlight the desired register in the table, and then
press
{Advanced}.
• From the Enables Menu, press {Advanced}.
On the
Advanced Memory Menu, press the {Lock Unlock} button to toggle the mode.
• If currently unlocked, pressing {Lock Unlock} locks the register, and an “X”
appears in the appropriate table cell under the
Lock heading. If you attempt to
delete or over-write the register, an error message pops up on screen.
• If currently locked, pressing {Lock Unlock} unlocks the register and removes the
“
X” from the table cell.
aÉäÉíáåÖ=oÉÖáëíÉêë
The “delete register” feature is available in the following memory mode only:
• View Mode
All registers except “locked” registers can be deleted. This action clears the selected
memory register completely. To use the feature:
• From the Memory Menu, highlight the desired register in the table, and then
press
{Advanced}.
• From the Enables Menu, press {Advanced}.
On the
Advanced Memory Menu, ensure that the register is unlocked. Then, press the
{Delete Register} button to delete the register. You will be asked to confirm.
Advanced
Lock
Unlock
Delete
Register