Filter
Top Products
218 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
System Menu
fåéìí=mêçÅÉëëáåÖ=pÉÅíáçå
The figure below illustrates the Input Processing Section for universal inputs:
Figure 5-93. Input Processing Section, Universal Inputs
The following adjustments are provided:
• Press {Sharpness} to display the Sharpness value button. Use the button (or
knob) to set the input’s sharpness.
Range: -16 (very smooth) to 15 (very sharp)
Default: 0
• Press {Flicker Filter} to display the Flicker Filter value button. Use the button
(or knob) to adjust the filter for interlaced inputs.
• Press {Pulldown Comp} to toggle the Pulldown Compensation mode on or off.
~ Select On to apply pulldown compensation, in order to process video
derived from film material.
~ Select Off to disable the mode. This is the default mode.
• Press {De-Interlace} to display the De-Interlace Pop-up. If the input is
interlaced, this function enables you to set how the system processes the input.
The following options are available:
~ Select Motion Adaptive to use motion adaptive de-interlacing. In this
mode, the
{Motion Threshold} button appears. See below for details.
Note
This function is available for analog inputs only, with the
exception of NTSC and PAL. The button does not appear
when SDI, DVI, NTSC or PAL inputs are selected on the
UIC.
Note
V Total is a fixed value which cannot be adjusted.
Important
Any time that input timing adjustments are made, the mask
settings for the selected input will automatically be reset to
their default values — without any notification on screen.
Processing
De-
Interlace
Adaptve
Motion
Thres-
hold
Pulldown
Comp
Off
Sharp-
ness
Flicker
Filter
Sharp-
ness
Flicker
Filter
Pulldown
Comp
Off
Note
This function applies only for standard video (component, s-
video, composite) inputs.
De-
Interlace
Adaptve