Filter
Top Products
FSN Series • User’s Guide • Rev 01 83
3. Control Panel Orientation
Control Panel Descriptions
jLb=qê~åëáíáçå=pÉÅíáçå
The M/E Transition Section provides the controls for creating transitions such as cuts,
mixes, wipes, keys and PIP effects. The figure below illustrates the section:
Figure 3-12. M/E Transition Section (sample)
Following are descriptions of each section:
1) M/E Transition Display
The M/E Transition Display provides four important status fields:
Figure 3-13. M/E Transition Display
From left to right:
~ Last Memory Register — the top line is the field title: MEM. The bottom
line indicates the last memory register recalled to the M/E. When
another M/E register is recalled using the Memory Section, the bottom
line updates.
BG
KEY
1
KEY
2
MIX WIPE
FX
TRIG
CUT
KEY 1
CUT
KEY 2
MIX
KEY 1
MIX
KEY 2
M EM K E Y 1 K E Y 2 T R A N
2 1 P C 2 V T R 1 3 0
CUT
AUTO
TRAN
5
1
6
3
4
7
2
1) M/E Transition Display 4) Effects Group 7) Direct Key Control Group
2) T-Bar and Transition LEDs 5) Cut
3) Next Transition Group 6) Auto Transition
M E M K E Y 1 K E Y 2 T R A N
2 1 P C 2 V T R 1 3 0
Last
Memory
Register
Key 1
Source
Key 2
Source
Current
Transition
Rate