Filter
Top Products
FSN Series • User’s Guide • Rev 01 179
5. Menu Orientation
Memory Menu
• Module Section — Below the table is a matrix of buttons, one for each module.
Lines are drawn to the corresponding cells in the table for reference. Please note:
~ For version 3.0, the CUST and STILL buttons are grayed out.
~ In Store Mode, the M/E 1, PGM, SYS, AUX and DVE buttons are always
blue, indicating their availability for storage or modification. When
selected, the button is bordered in yellow, and its corresponding Enables
appear in the
Enables Section.
~ In Recall and View modes, if a button is grayed out, that module was not
stored in the selected register. If a button is blue, it can be selected and
modified (in
Recall mode), or viewed (in View mode).
• Enables Section — When a blue button is selected in the Module Section, the
bottom portion of the menu shows all available Enables for that module. The title
of this section (in the black bar) changes as different modules are selected.
Depending on the mode, the Enables can be viewed (only), or modified:
~ In View Mode, Enables can only be viewed.
~ In Store Mode, Enables can be modified. All Enables will be on by
default, when you enter the
Store Mode.
~ In Recall Mode, Enables can be modified — but only those that were
originally “enabled” in the selected register.
When an Enable is modified, it can be toggled on or off as desired.
~ When toggled On, the Enable is included in the selected memory Store
or Recall operation.
~ When toggled Off, the Enable is excluded from the selected memory
Store or Recall operation.
~ When an Enable is grayed out, it was not included in a previous memory
Store operation.
Refer to the “
Enable Descriptions” section on page 180 for explanations of each
category of Enables.
The following functions are also available:
• Registers can be selected with the top knob, or by pressing the {Memory
Register}
value button. Refer to the “Selecting Registers” section on page 183
for details.
• Press {Description} to display the keyboard, which enables you to enter a
register description (or name). Refer to the “
Naming Registers” section on
page 184 for details.
• Press {Advanced} to display the Advanced Memory Menu, which allows you to
delete and lock registers. The menu is only available in
View Mode. Refer to the
“
Advanced Memory Functions” section on page 185 for details.
• On the Enables Menu:
~ Press {All On} to toggle all Enables on during a Store or Recall
operation.
~ Press {All Off} to toggle all Enables off during a Store or Recall
operation.