Filter
Top Products
36 FSN Series • User’s Guide • Rev 01
2. FSN-1400 Orientation
Hardware Description
^ìñáäá~êó=lìíéìí=cäÉñáÄáäáíó
The following two tables outline the system’s auxiliary output flexibility, based on the
number of 2-channel UOC cards installed, the number of 8-channel NAC cards installed,
and whether or not the MVR is installed.
The totals listed below include the six standard native Aux outputs on the M/E card, plus
the number of outputs on the installed UOCs and NACs.
• With no MVR (Multiviewer) installed in slot 11, three chassis slots (11, 12 and 13)
are available for Aux output cards. The following combinations of Aux outputs are
available:
• When the MVR is installed in slot 11, only two slots (12 and 13) are available for
Aux output cards. The following combinations of Aux outputs are available:
Note that when additional Aux output cards are installed, use the Aux Setup Menu to map
Aux outputs to the control panel, and name Aux outputs (if desired). In Chapter 5, refer to
the “Aux Setup Menu
” section on page 240 for details.
Table 2-3. Auxiliary output flexibility - Multiviewer is not installed
Total Aux Outputs — Multiviewer Not Installed
0 NACs installed 1 NAC installed 2 NACs installed 3 NACs installed
0 UOCs installed 6 14 22 30
1 UOC installed 8 16 24
2 UOCs installed 10 18
3 UOCs installed 12
Table 2-4. Auxiliary output flexibility - Multiviewer is installed
Total Aux Outputs — Multiviewer Installed
0 NACs installed 1 NAC installed 2 NACs installed
0 UOCs installed 6 14 22
1 UOC installed 8 16
2 UOCs installed 10