Filter
Top Products
FSN Series • User’s Guide • Rev 01 25
NK==fåíêçÇìÅíáçå
About the FSN Series
póëíÉã=`çåÑáÖìê~íáçå
The following topics are discussed in this section:
• Basic FSN Series System
• Required Cards
• Optional Cards
• M/E Features
_~ëáÅ=cpk=pÉêáÉë=póëíÉã
Because the FSN Series uses modular components, many flexible system configurations
can be designed to suit your exact production requirements. The basic system consists of
the following:
• One FSN-150 control panel.
• One FSN-1400 chassis.
• One System Card and one Crosspoint M/E Card, both of which are required on
all systems. Refer to the “Required Cards” section below for details.
All other cards are optional, including the NIC, UIC, UOC, DVE, NAC and MVR. Refer to
the “Optional Cards” section on page 26 for details.
oÉèìáêÉÇ=`~êÇë
Required FSN Series cards are described below.
• System Card — this required card includes:
~ Video reference input and loop through.
~ Configurable video reference output.
~ Ethernet port (10/100).
~ One tally connector (24 contact closures).
~ One GPIO connector (four GPI ports and eight GPO ports).
In Chapter 2, refer to the “System Card
” section on page 44 for details.
• Crosspoint M/E Card — This required card includes:
~ Crosspoint matrix.
~ M/E and PGM circuitry.
~ Dedicated DSK cut and fill inputs.
~ Six Aux outputs.
~ Four PGM outputs (PGM [2x], PVW and CLN).
~ Three M/E 1 outputs (PGM 1, PVW 1 and CLN 1).
~ Three M/E 2 outputs (PGM 2, PVW 2 and CLN 2).
In Chapter 2, refer to the “M/E Card
” section on page 49 for details.