Filter
Top Products
406 FSN Series • User’s Guide • Rev 01
8. DVE Operations
Automatic DVE Triggering
táéÉ=qêáÖÖÉê=léíáçåë
The options for triggering wipes are the same as triggering mixes — press WIPE + FX
TRIG
instead of MIX + FX TRIG, and you can perform the following transitions:
• Trigger Keyer 1 and wipe-key the PIP
• Trigger Keyer 2 and wipe-key the PIP
• Trigger Keyers 1 and 2 and wipe-key the PIPs
• Wipe the Background and Keyer 1, and trigger Keyer 1
• Wipe the Background and Keyer 2, and trigger Keyer 2
• Wipe the Background and Keyers 1 and 2, and trigger Keyers 1 and 2
For each transition listed above, the label “
WFX” appears in the Transition Display
above
KEY 1 and/or KEY 2, indicating that the selected keyers are armed to wipe and the
selected effects are armed to trigger.
Figure 8-33. Wipe BG and KEY 1, and trigger the DVE effect on Keyer 1
To cancel the trigger prior to running the effects, press MIX or WIPE. In addition, all “tap
out” functions apply, using the
WIPE button instead of the MIX button. Refer to the “Tap In,
Tap Out Functions” section on page 407 for details.
BG
KEY
1
MIX WIPE
FX
TRIG
M E M T R A N
2 1 C A M 1 G F X 2 3 0
F X Y 2W K
KEY
2
E