Filter
Top Products
FSN Series • User’s Guide • Rev 01 191
5. Menu Orientation
System Menu
• Press {Multiviewer Setup} to display the Multiviewer Setup Menu, which
enables you to set up all aspects of the optional Multiviewer. Refer to the
“
Multiviewer Setup Menu” section on page 239 for complete details.
• Press {Aux Setup} to display the Aux Setup Menu, which enables you to set up
and map standard and optional Aux outputs. Refer to the “
Aux Setup Menu”
section on page 240 for complete details.
• Press {Other Setup} to display the Other Setup Menu, which enables you to set
the priority of M/E 2 on the FSN-150. Refer to the “
Other Setup Menu” section on
page 253 for complete details.
The following functions are provided in the
Miscellaneous Functions group:
• Press {User Prefs} to display the User Preferences Menu, which enables you to
set a variety of important user preferences and options. Refer to the “
User
Preferences Menu” section on page 254 for details.
• Press {Diags} to display the Diagnostics Menu, which enables you to perform a
variety of diagnostic tests to the system and view system error logs. Refer to the
“
Diagnostics Menu” section on page 257 for details.
• Press {Software} to display the Software Menu, which enables you to update the
FSN-1400 and control panel with the latest software version. Refer to the
“
Software Menu” section on page 268 for details.
• Press {Output Test Patterns} to display the Output Test Patterns Menu, which
enables you to select and display test patterns on all system outputs. Refer to the
“
Output Test Patterns Menu” section on page 270 for details.
The following functions are provided in the
Tool Bar:
• Press {Lock Panel} to lock and unlock the control panel. Refer to the “Lock/
Unlock Panel” section on page 272 for details.
• Press {Save All} to save all system input and output setup parameters to non-
volatile memory. Refer to the “
Save All” section on page 272 for details.
• Press {Backup and Restore} to display the Backup and Restore Menu, which
enables you to backup and restore the system to/from a USB drive. Refer to the
“
Backup and Restore Menu” section on page 273 for details.
Multi-
viewer
Setup
Aux
Setup
Other
Setup
User
Prefs
Diags
Software
Output
Test
Patterns
Lock
Panel
Save
All
Backup
and
Restore