Filter
Top Products
FSN Series • User’s Guide • Rev 01 357
8. DVE Operations
Introduction to the DVE
• Adjustable Color Effects
~ Keyframe overall brightness and contrast control
~ Individual RGB brightness and contrast control
~ Monochrome mode
~ Hue and saturation control
~ Invert mode on / off
• Adjustable Image Processing
~ De-interlace mode: adaptive or field-to-frame
~ Adjustable motion threshold
• Adjustable Image Effects
~ Horizontal and vertical flip
~ Keyframe freeze, freeze on run
~ Strobe mode with adjustable rate
jìäíáéäÉ=t~óë=íç=qêáÖÖÉê
The following topics are discussed in this section:
• M/E Bank Triggers
• PGM Bank Triggers
jLb=_~åâ=qêáÖÖÉêë
There are three ways to trigger dual keyframe DVE effects on the M/E bank:
• Manual trigger — simplified procedure:
~ Program the dual keyframe effect.
~ Enable the associated keyer on the M/E.
~ Select the desired transition (e.g., mix key, wipe key, etc.). If you don’t
enable
MIX or WIPE, only the effect will run.
~ Enable the FX TRIG button.
~ Run the effect manually with the T-Bar.
• Menu trigger — simplified procedure:
~ Program the dual keyframe effect.
~ Enable the associated keyer on the M/E.
~ Run the effect using the forward (X) and backward (W) buttons on the
DVE menu.
Note
Please note the following important points:
• This method only runs the DVE effect.
• The FX TRIG button does not have to be enabled.
• The effect cannot be paused during the run interval.