Filter
Top Products
232 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
System Menu
`äÉ~å=cÉÉÇ=pÉíìé=jÉåì
From the System Menu, press {Clean Feed Setup} to display the Clean Feed Setup
Menu, which enables you to set clean feed outputs and the source for the ASSIGN button
(in the control panel’s
Aux Section).
The figure below illustrates a sample
Clean Feed Setup Menu.
Figure 5-105. Clean Feed Setup Menu (sample)
The Clean Feed Setup Menu has two panels:
• Clean Feed Outputs
• Assign Button
`äÉ~å=cÉÉÇ=lìíéìíë
Press {Clean Feed Outputs} to set up all physical clean feed outputs on the FSN-1400’s
M/E Card. The graphic on the
Palette is a “flow-chart.” It illustrates the clean feed points
that can be mapped to the clean feed output connectors, with buttons provided for each
selection point.
Three mutually exclusive clean feed points are provided for M/E 1’s clean feed output:
• Press {M/E 1 Clean 1} to select the clean feed point prior to Keyer 1.
• Press {M/E 1 Clean 2} to select the clean feed point prior to Keyer 2.
• Press {M/E 1 Out} to select the M/E 1 program output.
Clean
Feed
Outputs