Filter
Top Products
408 FSN Series • User’s Guide • Rev 01
8. DVE Operations
Automatic DVE Triggering
q~é=áåI=q~é=lìí=bñ~ãéäÉë=
The following examples are provided in this section:
• Mix KEY 1 and trigger KEY 2
• Mix BG, trigger KEY 1, mix-key-trigger KEY 2
• Wipe-key-trigger KEY 1, wipe KEY 2
jáñ=hbv=N=~åÇ=íêáÖÖÉê=hbv=O
Use the following steps to mix KEY 1 and trigger KEY 2:
1. Program a “mix-key-trigger” transition for both keyers:
~ In the Next Transition Group, press KEY 1 and KEY 2.
~ In the Effects Group, press MIX and FX TRIG.
2. “Tap out” the trigger on KEY 1.
~ Press and hold FX TRIG, then press KEY 1.
3. “Tap out” the mix on KEY 2.
~ Press and hold MIX, then press KEY 2.
At the conclusion of the procedure, the
M/E Transition Section appears as shown below,
and you’re ready to mix
KEY 1 and trigger KEY 2.
Figure 8-34. Mix Key 1, Trigger Key 2
BG
KEY
1
KEY
2
MIX WIPE
FX
TRIG
M E M T R A N
2 1 C A M 1 G F X 2 3 0
Y 1K E F X
Note
Remember that once you “tap out” a trigger component, you
can tap it back in — provided that the button for the effect that
you want to include is already lit in the
Effects Group.