Filter
Top Products
FSN Series • User’s Guide • Rev 01 237
5. Menu Orientation
System Menu
q~ääó=pÉíìé=jÉåì=cìåÅíáçåë
The following functions are provided on the Tally Setup Menu’s tool bar:
• To associate an input with a tally on the highlighted row, press {Select Input} to
display the
Input Selection Keypad.
Figure 5-109. Input Selection Keypad (sample)
Use the use the up (S) and down (T) arrows to locate the desired input, then
press
{Apply} to accept. Once accepted, the input is displayed in the table.
• To clear the input-to-tally association on the highlighted row, press {Clear Input}
to remove the input from the table.
• Press {Select Color} to display the Select Color Pop-up, which enables you to
choose a red, green or amber color block to place in the column adjacent to the
tally number. You can also select “
Clear” to remove the color block.
Select
Input
Select the input to assign to
tally 6
Apply
Close
CAM1
CAM2
CAM3
CAM4
DO-1
DO-2
VT-A
VT-B
Clear
Input
Select
Color
Note
This function is designed only to assist the engineer who is
setting up tallies. It provides a visual indication on the menu
of the type of tally you are configuring — red, green or amber.
The function does not affect how the tally operates.