Filter
Top Products
62 FSN Series • User’s Guide • Rev 01
2. FSN-1400 Orientation
Card Descriptions
jìäíáîáÉïÉê=`~êÇ
Card status: Optional
Installs in slot: 11
Maximum number of cards per chassis: 1
The MVR (Multiviewer) is an optional card that provides the ability to display up to 16
source PIPs in both single and dual monitor configurations. With the desired monitor(s)
connected to the card, users can set the MVR’s output resolution, and select from a variety
of pre-defined multiviewer layouts.
The figure below illustrates the MVR’s front edge and rear panel connectors:
Figure 2-13. MVR front edge and rear panel connectors
Following are descriptions of all MVR components:
1) Ejectors
Use the card’s top and bottom Ejectors to remove (and re-insert) the card.
2) Card Power LED
The Card Power LED indicates power status for the card. Refer to the “Card
LEDs” section on page 64 for details.
3) Loaded LED
The Loaded LED indicates the status of all FPGAs on the card. Refer to the
“Card LEDs” section on page 64 for details.
SDI
DVI Digital
DVI Digital
2
1
LTC Input
Power
Loaded
Multiviewer Card
MVR
1
1
Front Edge Rear Panel
4
5
32
6
1) Ejectors 3) Loaded LED 5) MVR Output 2
2) Card Power LED 4) MVR Output 1 6) LTC Input