Filter
Top Products
368 FSN Series • User’s Guide • Rev 01
8. DVE Operations
DVE Menu Orientation
• The Live LED indicates the keyframe’s state:
~ OFF = The keyframe is not on PGM or PST
~ GRN = The keyframe is on PST
~ RED = The keyframe is on PGM
• The Effect KF control (either 1 or 2) is a button. Pressing the blue button moves
the yellow border from keyframe to keyframe, and activates the selected keyframe
for editing.
~ Press button 1 to edit keyframe 1
~ Press button 2 to edit keyframe 2
If button
2 is grayed out, the effect is currently a “single keyframe” effect — or,
keyframe 2 has not yet been added.
• The Shot Box KF field indicates the shot box keyframe currently applied to either
keyframe
1 or 2. If the associated field is blank, no shot box keyframe has been
applied, or the shot box effect (that was
previously applied) has been modified.
qççä=_~ê=cìåÅíáçåë
The following common DVE functions are provided on the Tool Bar.
• Press {DVE} to change the DVE channel under control. When pressed, all DVE
names appear in the pop-up, as assigned on the
DVE Assign Menu. When a
new channel is selected, the new name appears in the button’s insert. The
Important
The keyframe that is shown on PST or PGM does not change
when the
Effect KF buttons are pressed. To “see” a
keyframe in a dual keyframe effect, use the
DVE Run buttons
(see below for details).
DVE
DVE-1