Filter
Top Products
350 FSN Series • User’s Guide • Rev 01
7. Operations
Backing Up and Restoring the System
_~ÅâáåÖ=ré=~åÇ=oÉëíçêáåÖ=íÜÉ=póëíÉã
The following topics are discussed in this section:
• Backing Up the System
• Restoring the System
_~ÅâáåÖ=ré=íÜÉ=póëíÉã
The system backup procedure enables you to store the entire system setup to a USB drive,
including all memory registers and the DVE shot box.
Use the following steps to back up the system:
1. Navigate to the System Menu:
~ In the Menu Bar, press {Page} to display page 2 (if required). Then,
press the
{System} button.
2. Press {Backup and Restore} to display the Backup and Restore Menu.
3. Insert a USB drive into the USB Port on the top of the control panel.
4. Press {Backup System} to display the Backup Menu.
5. In the directory, navigate to the folder in which you want to store a backup file.
~ To open or close a highlighted folder, press {Open/Close} as required.
~ If required, press {Create New Folder} to create a new folder at the
current location in the directory.
~ As required, press {Rename Folder} to rename the highlighted folder.
6. Press {Backup System} to create the backup file. If the selected directory
already contains a backup file, you will be asked to confirm an “overwrite,” or
cancel the operation.
Please note:
• You cannot delete, move or copy files (or folders) using the touch screen
interface. To accomplish these functions, use your PC.
Note
You can only write one backup file in a selected folder. If you
wish to store multiple backup files on a single USB drive,
create additional folders as required.
Tip
Touch the desired location on the touch screen, or for more
accuracy, use the eraser end of a pencil.