Filter
Top Products
FSN Series • User’s Guide • Rev 01 369
8. DVE Operations
DVE Menu Orientation
current panel is retained, but all parameters for the new channel appear on the
panel.
• For dual keyframe effects, press {Run Reverse} to run the effect from keyframe 2
to 1. The button is grayed for single keyframe effects, and grayed out when the
effect is on keyframe 1.
• For dual keyframe effects, press {Run Forward} to run the effect from keyframe 1
to 2. The button is grayed for single keyframe effects, and grayed out when the
effect is on keyframe 2.
• Press {Shot Box} to display the Shot Box Menu, which enables you to store and
name up to 128 individual keyframes, and apply them to any selected effect
keyframe. Refer to the “
Shot Box Menu” section on page 381 for details.
• Press {DVE Links} to display the DVE Links Keypad, which enables you link
multiple DVE channels together, and program them as one. Refer to the “
DVE
Links” section on page 388 for details.
• Press {Key Menu} to return to the Keyer Menu associated with the selected DVE
channel. This function is useful, for example, when you want to change the key
mode from
PIP to Key. In Chapter 5, refer to the “Keyer Menu” section on
page 157 for details.
• Press {Advanced} to display the Advanced DVE Menu, which enables you to
create color effects, flips, freezes and more. Refer to the “
Advanced DVE Menu
— Color Effects Panel” section on page 383, and the “Advanced DVE Menu —
DVE Extras Panel” section on page 385 for details.
páòÉ=~åÇ=mçëáíáçå=^ÇàìëíãÉåíë
On the Size and Position Panel, the central Palette provides two easy preset areas —
one for size and one for position. Controls are also provided for aspect ratio and manual
size and position adjustments.
páòÉ=mêÉëÉíë
The Size Preset section enables you to set PIP or key size without affecting position.
Figure 8-8. DVE Size Presets
Each preset sets the PIP or Key’s H Size to the listed fraction of the native resolution’s H
Size
. To maintain the current aspect ratio, V Size is modified accordingly. The PIP or key’s
position is not affected, and all other parameters are retained (e.g., crop, border, etc.).
• Press {0} to set H Size to zero (infinity).
• Press {1/4} to set H Size to one-quarter native resolution H Size.
Shot
Box
DVE
Links
Off
Key
Menu
Ad-
vanced
Size
0 1/4 1/2 3/4 Full