Filter
Top Products
226 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
System Menu
j~é=_ìííçåë=jÉåì=cìåÅíáçåë
The following adjustments are provided in the Map Buttons Menu:
• Press {Panel Button} (or use the knob) to select the button that you wish to map.
Note that selecting buttons in this manner automatically affects the state of the
{SHIFT} button.
• Press {SHIFT} to switch between mapping un-shifted and shifted buttons:
~ When {SHIFT} is off, you can map buttons 1 - 10 plus M/E, and the
labels in the
Button column read 1 - 10 plus M/E.
~ When {SHIFT} is on, you can map buttons 11 - 20 plus M/E, and the
labels in the
Button column read 11 - 20 plus M/E.
• Press {Map Source/Cut} to map an input (source) or a linear key “cut” signal to
the selected panel button. On the highlighted row in the table, the cell under the
Source/Cut column highlights in blue, and the Map Buttons Keypad appears.
Refer to the “
Map Buttons Keypad” section below for details.
• Press {Map Linear Key Fill} to map a linear key “fill” signal to a panel button. On
the highlighted table row, the cell under the
Linear Key Fill column highlights in
blue, and the
Map Buttons Keypad appears. Refer to the “Map Buttons
Keypad” and “Mapping Luma Keys and Linear Keys” sections for details.
• On the highlighted row, press {Un-map Source/Cut} to un-map the source in the
Source/Cut column. Once pressed, the source is removed from the panel.
• On the highlighted row, press {Un-map Linear Key Fill} to un-map the source in
the
Linear Key Fill column. Once pressed, the source is removed from the panel.
Panel
Button
8
SHIFT
Map
Source /
Cut
Map
Linear
Key Fill
Un-map
Source /
Cut
Un-map
Linear
Key Fill