Filter
Top Products
FSN Series • User’s Guide • Rev 01 363
8. DVE Operations
DVE Menu Orientation
asb=^ëëáÖå=jÉåì
From the System Menu, press {DVE Assign} to display the DVE Assign Menu:
Figure 8-3. DVE Assign Menu (sample)
The DVE Assign Menu enables you to assign DVE channels to keyers. Once assigned,
you can elect to use the DVE or bypass the DVE — simply by selecting the desired mode
on the associated keyer’s
Keyer Menu.
DVE assignment is highly flexible. You can:
• Assign, un-assign and name DVE channels.
• Fly PIPs, luma keys, linear keys and split keys. Refer to the DVE Assignment
Information Pop-up
below for details.
On the menu, the left side of the
Palette shows the Rear I/O View, while the right side
shows the
DVE Assignment Table. Please note:
• Two chassis slots (9 and 10) are provided for DVE cards, each of which provides
two DVE channels — for a maximum of four channels on line.
• DVE channels 1 and 2 are dedicated to slot 9. Channels 3 and 4 are dedicated to
slot
10. If a DVE card is only installed in slot 10, only channels 3 and 4 are
available. If a DVE card is not installed, the slot label reads “
Not Installed.”
• On each card, each channel is a button that is used for DVE assignment and
naming channels.