Filter
Top Products
FSN Series • User’s Guide • Rev 01 421
9. Multiviewer Operations
Multiviewer Menu Orientation
Press {UMD Color 1} to select a specific color that can be assigned to any UMD. Use the
Color Wheel, the Color Chips, the User Colors or the Knobs to select the desired color.
Select colors for
{UMD Color 2}, {UMD Color 3} and {UMD Color 4} in the same manner.
Once colors are assigned, use the
{UMD Color} button on the Multiviewer Setup Menu to
assign colors to specific PIP UMDs.
`äçÅâ=pÉíìé=jÉåì
From the Multiviewer Setup Menu, press {Clock Setup} to display the Clock Setup
Menu. These functions apply whenever a layout is selected that includes a clock.
Two functions are available:
Press
{Clock Source} to toggle the clock source between Internal and LTC.
• When set to Internal, the system’s internal clock is displayed. Remember that
time is set on the
User Preferences Menu. In Chapter 5, refer to the “User
Preferences Menu” section on page 254 for details.
• When set to LTC, the Multiviewer card’s LTC (Longitudinal Time Code) Input is
used. In Chapter 2, refer to the “
Multiviewer Card” section on page 62 for details
on the types of time code connections that can be used.
Press
{Clock Display} to toggle the clock between 12 HR and 24 HR modes.
UMD
Color
1
Note
Remember that UMD colors can be used to “group” sources.
For example, if you want to visually distinguish your cameras
or servers from other Multiviewer sources, create and assign
a custom UMD color.
Clock
Source
Internal
Clock
Display
12 HR