Filter
Top Products
FSN Series • User’s Guide • Rev 01 177
5. Menu Orientation
Memory Menu
• The eight right-hand columns (under the Modules heading) indicate which
modules are included in each register. These columns correspond to the eight
categories of modules available on the panel:
M/E 1, M/E 2, PGM, SYS (System),
Cust (Custom), Still, Aux and DVE. In Chapter 3, refer to the “Memory Section”
heading on page 94 for a description of each module.
Please note:
~ An “x” in a cell indicates that the module is included in the register. The
“
x” does not indicate the status of the Enables within the module.
~ A blank cell indicates that the module is not part of the register.
~ If a column heading is grayed out, that module is not currently available.
• In the table, the yellow highlight indicates the selected register. There are many
ways that you can select registers, including touching, scrolling with the top knob,
and pressing the
{Memory Register} value button. Refer to the “Selecting
Registers” section on page 183 for details on all selection methods.
• Press {Description} to display the keyboard, which enables you to enter a
register description (or name). Refer to the “
Naming Registers” section on
page 184 for details.
• Press {Enables} to display the Enables Menu, which allows you to view or
modify the Enables within each module. Refer to the “
Enables Menu
Description” section on page 178 for details.
• Press {Advanced} to display the Advanced Memory Menu, which allows you to
delete and lock registers. Refer to the “
Advanced Memory Functions” section
on page 185 for details.
Note
The Cust and Still modules are not available in version 3.0.