Filter
Top Products
190 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
System Menu
póëíÉã=jÉåì=cìåÅíáçåë
On the System Menu, navigation buttons are arranged in three groups:
• Setup Functions (at the top of the Palette)
• Miscellaneous Functions (at the bottom of the Palette)
• Tool Bar functions
The following functions are provided in the
Setup Functions group:
• Press {Com Setup} to display the Communications Setup Menu, which enables
you to “discover” an FSN-1400 chassis (if required), and set up Ethernet. Refer to
the “
Communications Setup Menu” section on page 194 for details.
• Press {Ref and Output Setup} to display the Reference and Output Setup
Menu, which enables you to set up the system’s video reference input, native
resolution and output timing mode. Refer to the “
Reference and Output Setup
Menu” section on page 197 for details.
• Press {Input Setup} to display the Input Setup Menu, which enables you to set
up both native and universal switcher inputs. Refer to the “
Input Menu” section
on page 202 for details.
• Press {Map Buttons} to display the Map Buttons Menu, which enables you to
map inputs and internal sources to the control panel. Refer to the “
Map Buttons
Menu” section on page 224 for details.
• Press {External DSK Setup} to display the External DSK Setup Menu, which
enables you to set up the
DSK Cut and DSK Fill inputs. Refer to the “External
DSK Setup Menu” section on page 229 for details.
• Press {Clean Feed Setup} to display the Clean Feed Setup Menu, which
enables you to set clean feed outputs and the source for the
ASSIGN button.
Refer to the “
Clean Feed Setup Menu” section on page 232 for details.
• Press {Tally Setup} to display the Tally Setup Menu, which enables you to set all
tally relay closures. Refer to the “
Tally Setup Menu” section on page 235 for
complete details.
• Press {DVE Assign} to display the DVE Assign Menu, which enables you to
assign DVE channels to keyers, and name the channels. Refer to the “
DVE
Assign Menu” section on page 238 for complete details.
Note
In the Setup Functions group, buttons are arranged in the
recommended order in which the individual setup procedures
should initially be performed — from left to right, and from top
to bottom.
Com
Setup
Ref and
Output
Setup
Input
Setup
Map
Buttons
External
DSK
Setup
Clean
Feed
Setup
Tally
Setup
DVE
Assign