Filter
Top Products
FSN Series • User’s Guide • Rev 01 223
5. Menu Orientation
System Menu
Remember that once the image is masked as desired, you can use the {Fill H},
{Fill V} or {Fill H/V} functions to scale the image to full screen.
fåéìí=`çäçê=`çêêÉÅíáçå=m~åÉä
On the Input Setup Menu for universal inputs, press {Color Correct} to display the Input
Color Correction Panel. All functions are identical to those for native inputs. Refer to the
“
Input Color Correction Section” heading on page 210 for details.
fåéìí=pÉíìé=jÉåì=qççä=_~ê=cìåÅíáçåë
For both native and universal inputs, the following functions are provided in the Tool Bar:
• Press {Save Settings} to save the selected input’s setup parameters in non-
volatile memory.
• Press {Restore Saved Settings} to recall the selected input’s setup parameters
from non-volatile memory. This function effectively allows you to return to the
saved settings, after making temporary adjustments.
• Press {Restore Default Settings} to recall the selected input’s default setup
parameters back into the input’s “temporary” settings. This function does not
over-write the “saved” settings.
fåéìí=pÉíìé=kçíÉë
Please note the following important points regarding input setup:
• Because you can install and set up either a NIC or a UIC in input slots 3 and 4,
many creative input combinations are possible. However, if you move or change
input card assignments in these two slots during the setup procedure, the setup is
invalidated, and must be repeated once the final card configuration is reached.
Note
For each mask function, the range shown in the Keypad’s top
Function Bar is dynamic. For example, if you press {Mask
Left}
and mask 100 pixels from the image’s left edge, when
you press
{Mask Right}, the maximum range is now 100
pixels less.
Important
Any time that input timing adjustments are made, the mask
settings for the selected input will automatically be reset to
their default values — without any notification on screen.
Color
Correct
Save
Settings
Restore
Saved
Settings
Restore
Default
Settings