Filter
Top Products
262 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
System Menu
q~ääáÉë
From the Diagnostics Menu, press {Tallies} to display the Tally Diagnostics Menu. The
figure below illustrates a sample menu.
Figure 5-129. Tally Diagnostics Menu (sample)
The Tally Diagnostics Menu enables you to test all 24 tally relays. The Palette provides a
brief set of instructions for conducting the tests. Please note:
• When you enter the Tally Diagnostics Menu, the current on/off state of all tallies
are shown. While working within the menu, all settings on the
Tally Setup Menu
are disregarded.
The following diagnostic functions are provided on the menu:
• On the Palette, press any combination of buttons to close or open the selected
tally relay. Each numbered button represents the associated tally relay. In
Appendix A, refer to the “
Tally Connector” section on page 443 for pinouts.
• Press {Open All Tallies} to open all tally relays.
Tallies
7
Open
All
Tallies