Filter
Top Products
186 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
Aux Menu
^ìñ=jÉåì
The figure below illustrates a sample Aux Menu.
Figure 5-68. Aux Menu (sample)
The Aux Menu provides status-at-a-glance for all installed Aux outputs, plus the ability to
select a specific Aux bus on which to switch sources. To access the menu, press
{Page} in
the
Menu Bar to display page 2 (if required). Then, press the {Aux} button.
The
Aux Table provides three columns:
• The Aux column lists each installed (or mapped) Aux output, in ascending order.
If an Aux bus is mapped (or re-mapped) on the
Aux Setup Menu, that change is
reflected in this column.
• The Name column lists each Aux output’s default or custom name. Default
names are “
AUX ##.” Custom names can be up to eight characters in length.
• The Source column displays the names of the sources routed to each Aux output.
The column displays system-generated names (such as
Program) as well as
user-defined names as configured on the
Input Setup Menu.
Note
All setup, mapping and naming of Aux outputs is performed
on the
Aux Setup Menu. Refer to the “Aux Setup Menu”
section on page 240 for details.