Filter
Top Products
FSN Series • User’s Guide • Rev 01 51
2. FSN-1400 Orientation
Card Descriptions
13) DSK Cut In
One BNC is provided for a dedicated DSK Cut Input. The DSK Cut and DSK Fill
inputs must be locked to the FSN-1400 video reference within ± 0.5 lines, when
the {Output V-Lock} button is turned off (on the Reference and Output Setup
Menu). See the DSK Fill In description below for an important note.
14) DSK Fill in
One BNC is provided for a dedicated DSK Fill Input. The DSK Cut and DSK Fill
inputs must be locked to the FSN-1400 video reference within ± 0.5 lines, when
the {Output V-Lock} button is turned off.
15) Native Aux Outputs
Six BNCs are provided for the system’s six Native Aux Outputs. Source
selection is performed in the Aux Assign Section on the panel. In Chapter 3,
refer to the “Aux Section” heading on page 71 for details.
Important
When the {Output V-Lock} button is turned on (on the
Reference and Output Setup Menu), the position of the
DSK Cut and DSK Fill inputs on screen will change.
• If the user preference “Black on Invalid Video” is
turned on, the DSK turns off — because of the change
in output timing.
• If the user preference “Black on Invalid Video” is off,
the DSK will be visible — but in a shifted position. In
this condition, the video position can be adjusted by
changing the output timing of the DSK source itself.
In Chapter 5, refer to the “User Preferences Menu” section
on page 254 for details on the Black on Invalid Video mode.