Filter
Top Products
FSN Series • User’s Guide • Rev 01 175
5. Menu Orientation
Memory Menu
jÉãçêó=jÉåì=^ÅÅÉëë
There are two ways to access the Memory Menu:
• In the Menu Bar, press {Page} to display page 2 (if required). Then, press the
{Memory} button.
• Press and hold either the STORE or RECALL button in the control panel’s
Memory Section.
When either of the two methods above are used, the following rules apply:
• If neither the STORE nor the RECALL button is lit, you will access the menu in
View Mode.
• If STORE is lit, you will access the menu in Store Mode.
• If RECALL is lit, you will access the menu in Recall Mode.
Note
Regardless of the mode, you will always return to the last
menu used, either the
Memory Menu or the Enables Menu.
For example, if you are working on the
Enables Menu and
you jump over to the
Transition Menu, you will return to the
Enables Menu.
Important
Remember that you can store and recall memory registers by
using the
Memory Section on the control panel only —
without accessing the
Memory Menu. In this “panel only”
mode, you can select registers and modules, but you cannot
modify any Enables. Please note:
• If you store a register using the control panel’s
Keypad only (without using the Memory Menu), all
Enables will be on.
• If you recall a register using the control panel’s
Keypad only (without using the Memory Menu), all
Enables will be on — exactly as stored in the register.