Filter
Top Products
372 FSN Series • User’s Guide • Rev 01
8. DVE Operations
DVE Menu Orientation
bÑÑÉÅí=pÉíìé=m~åÉä
The figure below illustrates the DVE’s Effect Setup Panel:
Figure 8-10. DVE Effect Setup Panel (sample)
The Effect Setup Panel enables you to create new DVE effects, add and delete
keyframes, and clear keyframes. The following functions are provided:
• Press {New Effect} to create a new single keyframe effect. All previous effect
keyframes are deleted, and the new keyframe
1 is set to full screen center, with no
border and no shadow. In the table, all previous register and description
information clears.
• Press {Clear KF} to clear the current “selected” keyframe back to its default
values — full screen center, with no border and no shadow. You can clear either
keyframe
1 or 2 in this manner, without affecting the other un-selected keyframe.
• Press {Add KF} to add a second keyframe to a single keyframe effect. Once
pressed, the system makes an exact duplicate of the current keyframe, keyframe
2 is automatically selected, and the button grays out.
• Press {Delete KF} to delete the selected keyframe. If keyframe 1 is selected,
keyframe
2 becomes keyframe 1. The button is grayed out if there is only one
keyframe in the effect.
New
Effect
Clear
KF
Add
KF
Delete
KF