Filter
Top Products
FSN Series • User’s Guide • Rev 01 255
5. Menu Orientation
System Menu
rëÉê=mêÉÑÉêÉåÅÉë=q~ÄäÉ
The figure below illustrates a sample User Preferences Table.
Figure 5-124. User Preferences table (sample)
The User Preferences Table lists all available preferences, except for those provided in
the
Tool Bar. The yellow highlight indicates the preference that can be changed. To move
the highlight, touch any row or use the top knob.
The following columns of information are provided:
• Name — lists the name of the user preference.
• Description — lists the range of the selected user preference.
• Setting — lists the preference’s current setting.
The
{Set} button always applies to the highlighted preference, and the value shown in the
button’s insert
changes as different preferences are selected. Press {Set} to display the
keypad for the selected preference in the table, enabling you to change its value.
rëÉê=mêÉÑÉêÉåÅÉë=cìåÅíáçåë
The following user preferences are provided:
• Bus Display Brightness — controls the brightness of the programmable displays
above the PGM and M/E banks.
Range: 1 (dim) to 4 (bright)
• Control Panel Backlight — controls the overall brightness of all buttons on the
control panel.
Range: 1 (dim) to 10 (bright)
• Touch Screen Brightness — controls the brightness of the Touch Screen.
Range: 1 (dim) to 10 (bright)
• Transition Display Brightness — controls the brightness of the LCD displays
above the
M/E Transition Section, PGM Transition Section, Memory Section
and
Custom Section.
Range: 1 (dim) to 10 (bright)
• Transition Display Contrast — controls the contrast of the LCD displays above
the
M/E Transition Section, PGM Transition Section, Memory Section and
Custom Section.
Range: 1 (low contrast) to 10 (high contrast)
Name Description Setting
Bus Display Brightness 3Range: 1 – 4 (1 = dim, 4 = bright)
Touch Screen Brightness 9Range: 1 – 10 (1 = dim, 10 = bright)
Transition Display Brightness 10Range: 1 – 10 (1 = dim, 10 = bright)
Transition Display Contrast 10Range: 1 – 10 (1 = low contrast, 10 = high contrast)
Control Panel Backlight Range: 1 – 10 (1 = dim, 10 = bright)
Black on Invalid Video OnRange: On/Off
7
Set
9