Filter
Top Products
FSN Series • User’s Guide • Rev 01 165
5. Menu Orientation
Keyer Menu
pï~é=hÉó=pÉííáåÖë
The {Swap Key Settings} button swaps the settings between KEY 1 and KEY 2. The
function is not available for the DSK.
Please note:
• KEY 2 is always “over” KEY 1 in the M/E — visually on top of, and electronically
downstream of
KEY 1, as shown below.
Figure 5-47. Key Settings, KEY 2 over KEY 1
• When {Swap Key Settings} is pressed, the settings of the two keyers are
swapped. The key source that was previously in
KEY 2 moves to KEY 1, and
now appears “under” the other key source.
Figure 5-48. Key Settings swapped
• Press {Swap Key Settings} again to swap the settings back.
Swap
Key
Settings
Important
If a DVE channel is assigned to either keyer, a pop-up will
appear, alerting you that DVE channel assignments will be
changed if you proceed. For example, if DVE channel 1 is
assigned to Keyer 1, it will be assigned to Keyer 2 after the
“swap” is performed.