Filter
Top Products
120 FSN Series • User’s Guide • Rev 01
4. Installation
Card and Rear Panel Installation
7. Release the handles so that they spring back and lock into place.
8. Repeat from step 1 for all additional cards that you want to install.
9. When complete, re-install the chassis front door, close and secure.
`~êÇ=oÉãçî~ä
To remove a card:
1. Open the chassis front door and remove it (if desired).
2. For the selected card, simultaneously squeeze the two black handles together on
each ejector, then pull the ejectors away from the center of the card.
Figure 4-14. Card removal
3. When both latches have disengaged from the chassis, remove the card
completely and store it safely in an anti-static bag.
4. Repeat from step 2 for all additional cards that you want to remove.
5. When complete, re-install the chassis front door (if required), close and secure.
Squeeze
together
and pull
Squeeze
together
and pull
Caution
Always pull both latches simultaneously. If you only use one
latch, you can damage the card.
Important
Unused rear slots must always have blank panels installed.