Filter
Top Products
178 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
Memory Menu
bå~ÄäÉë=jÉåì=aÉëÅêáéíáçå
From the Memory Menu, press {Enables} to display the Enables Menu, as shown below
in the
View Mode.
Figure 5-60. Enables Menu, View Mode (sample)
The Enables Menu provides a close-up view of the “selected” register only, and all of its
associated Enables. The menu can be accessed in all modes (
View, Store and Recall),
but not all functions are available, depending on the mode.
Within an individual module,
Enables themselves are arrays of sub-functions which can be
toggled on or off as desired. For example:
• If you store a register that includes the M/E 1 module, there are seven Enables
within that module that divide the M/E into its various functional components.
• You can elect to leave all enables on (and thus store or recall the entire M/E), or
you can elect to turn specific Enables on or off (and thus store or recall only a
portion of the M/E). Refer to the “Enable Descriptions” section on page 180 for a
complete explanation of each module’s Enables.
The
Enables Menu is divided into three sections:
• Register Table — The top portion of the menu provides the same table as the
Memory Menu, but only the selected register is shown on a single line. All
column headings are identical, including the space above the three left-hand
columns — which is reserved for the large
STORE and RECALL labels.