Filter
Top Products
300 FSN Series • User’s Guide • Rev 01
6. System Setup
Aux Setup
Sizing and Scaling — Use the following steps to set up UOC sizing and scaling:
1. On the Aux Setup Menu, press the UOC Aux connector that you want to set up.
2. Press {Setup} to display the UOC Setup Menu for the selected output.
3. Press {Sizing and Scaling} to display the Output Sizing and Scaling Panel.
4. Press {Size and Position}, then use the {H Size}, {V Size}, {H Position} and {V
Position} controls to adjust the output’s size and position.
5. If desired, in the Quick Adjust section, use the {Fill H}, {Fill V} and/or {Fill H/V}
controls to scale the output.
6. If desired, press {Aspect Ratio}, then select the desired aspect ratio in the
Aspect Ratio Pop-up.
7. To size and position the video within the boundaries of the output, press {Pan
Zoom Source}. Use the {Source H Size}, {Source V Size}, {Source H Pos}
and {Source V Pos} controls to size and position the video.
8. Press {Mask}, then use the {Mask Top}, {Mask Bottom}, {Mask Left} and
{Mask Right} controls to mask selected portions of the output, as required.
9. If desired, in the Output Mask Presets section, select the desired preset — and
remember that all mask presets in this section are additive.
10. Press {Back} to return to the Aux Setup Menu.
Color Correction — Use the following steps to set up UOC color correction:
1. On the Aux Setup Menu, press the UOC Aux connector that you want to set up.
2. Press {Setup} to display the UOC Setup Menu for the selected output.
3. Press {Color Correct} to display the Output Color Correction Panel.
4. To adjust the output’s brightness, contrast and gamma, press {Bright Contrast
Gamma}
. Use the {Bright}, {Contrast} and {Gamma} controls as desired.
5. To adjust the output’s RGB brightness, press {RGB Bright}. Use the {Red
Bright}
, {Green Bright} and {Blue Bright} controls as desired.
6. To adjust the output’s RGB contrast, press {RGB Contrast}. Use the {Red
Contrast}
, {Green Contrast} and {Blue Contrast} controls as desired.
7. To adjust hue and color saturation, press {Hue Sat}. Use the {Hue} and {Sat}
controls as desired.
8. Press {Back} to return to the Aux Setup Menu.