Filter
Top Products
FSN Series • User’s Guide • Rev 01 187
5. Menu Orientation
Aux Menu
Please note:
• In the Aux table, buses are displayed as follows:
~ Active Aux buses are displayed in gray.
~ The highlighted Aux bus (on which sources can be switched) is displayed
in light yellow.
~ Aux buses that are not mapped, or for which physical Aux output cards
are not installed, are grayed out.
• The Aux Menu and the Aux section on the panel work in sync with each other —
selections on the physical Aux bus are reflected in the menu, and vice-versa
(including the behavior of the
SHIFT button). For example:
~ When you press Aux 2 on the Aux Output Row, Aux 2 will become
highlighted in the menu.
~ When you press Aux 14 on the menu, Aux 14 on the Aux Output Row
will light, along with the
SHIFT button.
• To select an Aux bus, press the desired bus on the Touch Screen, or select the
desired bus on the control panel’s
Aux Output Row.
• Aux outputs 1 through 16 on the menu are identical to Aux bus buttons 1 through
16 (with SHIFT) on the panel, but note that Aux outputs 17 through 30 only appear
on the
Aux Menu.
• Source switching is performed on Aux Source Row in the normal manner.