Filter
Top Products
FSN Series • User’s Guide • Rev 01 397
8. DVE Operations
Automatic DVE Triggering
^ìíçã~íáÅ=qêáÖÖÉêáåÖ=îá~=íÜÉ=`çåíêçä=m~åÉä=
The FX TRIG (Effects Trigger) button in the M/E’s Effects Group enables you to
automatically run dual keyframe DVE effects from the control panel. You can trigger effects
individually or in combination with transitions.
Figure 8-20. M/E Transition Section (sample)
In the M/E Transition Section, as shown above, three group of controls determine how
your dual keyframe DVE effects behave:
• The buttons in the Next Transition Group show which combination of layers are
armed for the next transition.
• The buttons in the Effects Group indicate which combination of effects (including
DVE triggers) are enabled for the next transition.
• The Transition Display indicates which specific DVE channel(s) are armed to
trigger — the DVE channel assigned to Keyer 1, Keyer 2 or to both keyers.
With one or more DVE channels installed in the FSN-1400, the
FX TRIG button works by
itself, or in combination with the
MIX and WIPE buttons — similar to the way that the
buttons in the
Next Transition Group behave. Whichever combination you enable
automatically disables those buttons that were not pressed.
For example:
• Pressing FX TRIG by itself allows you to trigger DVE effects only, without mixing
or wiping backgrounds or keys.
• Pressing FX TRIG + MIX enables you to mix keys and backgrounds in the normal
way,
and trigger one or two effects.
• Pressing FX TRIG + WIPE enables you to wipe keys and backgrounds in the
normal way,
and trigger one or two effects.
BG
KEY
1
KEY
2
MIX WIPE
FX
TRIG
CUT
KEY 1
CUT
KEY 2
MIX
KEY 1
MIX
KEY 2
M EM K E Y 1 K E Y 2 T R A N
2 1 P C 2 V T R 1 3 0
CUT
AUTO
TRAN
Transition
Display
Next Transition
Group
Effects
Group
FX
TRIG