Filter
Top Products
422 FSN Series • User’s Guide • Rev 01
9. Multiviewer Operations
Multiviewer Menu Orientation
^ëëáÖå=pçìêÅÉ=hÉóé~Ç
From the Multiviewer Setup Menu, press {Assign Source} to display the Assign Source
Keypad. This keypad enables you to assign a source to the highlighted PIP (as indicated
in the
Multiviewer Table).
Figure 9-5. Assign Source Keypad (sample)
In the keypad, use the up (S) and down (T) arrows to locate the desired source in the list,
then press
{Apply} to accept. When a source is assigned, its current name appears in the
PIP’s UMD — but this name can be changed using the
{UMD Text} function.
Three types of PIP sources are available:
Press
{Sources} to assign input sources to the selected PIP, e.g., those sources that
appear on the control panel.
Press
{Aux} to assign Aux output video to the selected PIP, e.g., Aux 1, Aux 2, etc. Note
that these Aux PIPs will not reflect Aux output scaling.
Press
{Other} to assign Program and Preview output video to the selected PIP, e.g.,
Program, Preview, M/E 1 PGM, etc.
Select the source to assign to
PIP 1
Apply
Close
CAM1
CAM2
CAM3
CAM4
DO-1
DO-2
VT-A
VT-B
Sources
Aux
Other
Sources
Aux
Other