Filter
Top Products
286 FSN Series • User’s Guide • Rev 01
6. System Setup
Restoring the System
oÉëíçêáåÖ=íÜÉ=póëíÉã
FSN Series system setup: Step 5 (optional)
In this procedure, you will restore your system configuration from a USB drive — provided
that you previously backed up your system to a USB drive.
S Prerequisite — Ensure that you are familiar with the Backup and Restore
Menu. In Chapter 5, refer to the “Backup and Restore Menu” section on
page 273.
Use the following steps to restore your system from the USB Drive:
1. Ensure that your USB drive is properly inserted in the control panel’s USB Port.
2. In the Menu Bar, press {System} to access the System Menu.
3. Press {Backup and Restore} to display the Backup and Restore Menu.
4. Press {Restore System} to display the Restore Menu.
5.
In the directory, highlight (touch) the file that you wish to restore.
6. Press {Restore System} to initiate the system restore procedure. Once the
restore process is complete, you will be prompted to press
{Restart}, which
restarts the FSN-1400 and the control panel.
At the conclusion of this procedure, your system is completely set up — exactly the way
that you left it when you performed a complete system “backup.” No further setup
operations are required.
Please continue with system operations. Refer to Chapter 7, “
Operations” on page 307
for details.
5