Filter
Top Products
238 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
System Menu
• Press {Set Tally Closure} to set a relay closure for the highlighted output. An “x”
in the highlighted cell indicates that a closure is set. In this condition, when the
assigned input (e.g.,
CAM1) appears on any of the designated outputs (e.g.,
PGM), the relay closes.
• Press {Clear Tally Closure} to clear the “x” from the highlighted output.
asb=^ëëáÖå=jÉåì
The DVE Assign Menu enables you to assign DVE channels to keyers. The figure below
illustrates a sample menu.
Figure 5-110. DVE Assign Menu (sample)
For complete information on DVE assignments and effect programming, refer to Chapter 8,
“
DVE Operations” on page 353.
Set
Tally
Closure
Clear
Tally
Closure