Filter
Top Products
200 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
System Menu
• Press {Output Format} to display the Output Format Keypad, which lists all
available output resolutions.
Figure 5-79. Output Format Keypad
Each entry is listed using the following convention: Format @ Fv (Hz). Select the
desired format and press
{Apply} to set the system’s native resolution.
In Appendix A, refer to the “
Output Formats” section on page 449 for a complete
list of all available output formats.
• Press the {Output V-Lock} button to toggle the Output V-Lock mode on or off.
This button only appears when the
{Reference Input} button is set to External.
~ On — In this mode, the {SDI Output Timing} button appears, enabling
you to set offsets anywhere relative to the external video reference input,
with positive or negative values.
Output
Format
Select the desired output
format from the list
Apply
Close
NTSC (480i)
PAL (576i)
1920 x 1080i @ 59.94
1920 x 1080i @ 50
1280 x 720p @ 59.94
1280 x 720p @ 50
1920 x 1080p @ 23.98
1920 x 1080p @ 24
1920 x 1080p @ 25
1920 x 1080p @ 29.97
Important
After you press {Apply}, the system displays a pop-up,
asking that you confirm or cancel the procedure.
Output
V-Lock
On
Important
When {Output V-Lock} is On, all native inputs are forced to
Frame Sync mode, and up to one frame of delay will be
incurred on all native inputs. In addition, on the
Input Setup
Menu
, the {Sync Mode} button is grayed out. Refer to the
“
Input Menu” section on page 202 for more information.