Filter
Top Products
168 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
Keyer Menu
When a copy is requested and DVE channels are involved, please note the following
important points:
• All parameters on the Keyer Menu are copied, provided that DVE channels are
assigned to both the source and destination keyers. If there is an incompatibility
between keyers, the
{Paste} button will be grayed out, and a message will appear
in the keypads’ “prompt” section.
• All parameters on the DVE Assign Menu are not copied.
• All parameters on the DVE Menu are copied (e.g., the DVE effect as
programmed).
• The DVE “arm” state in the control panel’s M/E Transition Section is copied.
^Çî~åÅÉÇ=hÉó=cìåÅíáçåë
From the Keyer Menu, press {Advanced} to display the Advanced Keyer Menu. For the
selected keyer, the following advanced functions are provided on the
Tool Bar:
• Press {Restore Default Settings} to return the selected keyer to its default
settings, as follows:
~ Clip, Gain and Opacity are reset to defaults.
~ Key Type is reset to Luma.
~ Key Fill is reset to Self.
~ DVE Mode (if applicable) is reset to Key.
~ DVE Mode enable (if applicable) is reset to On.
~ The Key Source does not change.
Restore
Default
Settings