Filter
Top Products
FSN Series • User’s Guide • Rev 01 271
5. Menu Orientation
System Menu
To send a test pattern to an output, touch the desired BNC in the Rear I/O View section,
then touch the desired test pattern in the matrix.
The following 13
Test Patterns are provided in the matrix:
• H Ramp
• V Ramp
• 100% Color Bars
• 75% Color Bars
• SMPTE RP-219 Color Bars
• 16 x 16 Grid
• 32 x 32 Grid
• Burst
• 50% Gray
• Gray Steps 1
• Gray Steps 2
• White
• Black
• SMPTE Bars
The following functions are provided in the matrix:
• Press {Off} to turn off the test pattern for the selected output.
• Press {Raster Box} to enable or disable a raster box for the selected output. The
raster box width is fixed at 1 pixel. Note that the raster box can be enabled even
if the test pattern is off.
The following functions are provided in the
Tool Bar:
• Press {Select All Outputs} to highlight all outputs in the Rear I/O View section.
When you select a test pattern in the matrix, that pattern is sent to all outputs.
• Press {All Off} to turn off all test patterns and all raster boxes on all outputs
simultaneously.
Select All
Outputs
All
Off